1. 在隔聲技術中，混合鋼板中間的玻璃棉需要在內外墻上填充，因此空分的隔音效果非常好。當然，有些碰撞聲音是由固體擴散產生的，所以如果是有窗戶的家庭墻，可以用中間有開口的兩根墻柱來建造，而天花板上的一些固定石膏板則裝有開口小的彈性結構，這樣可以更好地減少鋼板之間的固體聲音擴散。
In sound insulation technology, the glass wool between the mixed steel plates needs to be filled on the inner and outer walls, so the sound insulation effect of the air separation is very good. Of course, some collision sounds are generated by solid diffusion, so if it is a family wall with windows, it can be built with two wall columns with openings in the middle, while some fixed gypsum boards on the ceiling are equipped with elastic structures with small openings, which can better reduce solid sound diffusion between steel plates.
2. 保溫和技術為了達到更好的效果，通常在建筑物的外墻和屋頂上采用保溫材料，以保證長期的保溫效果。此外，在鋼板等輕鋼結構房屋中，除了填充墻柱之間的網格外，還在墻外粘貼一層保溫材料，可以更有效地切斷墻柱與外墻之間的熱橋。
2. In order to achieve better results, insulation materials are usually used on the exterior walls and roofs of buildings to ensure long-term insulation effects. In addition, in light steel structures such as steel plates, in addition to filling the grid between the wall columns, a layer of insulation material is also pasted outside the wall to more effectively cut off the thermal bridge between the wall columns and the exterior wall.
3. 消防工程中的一個主要問題是如何應用它。通常，在許多輕鋼結構中，防火層分為四層。例如，墻壁和鋼天花板的兩側通常需要防火石膏板。
A major issue in fire engineering is how to apply it. Usually, in many light steel structures, the fire protection layer is divided into four layers. For example, fire-resistant gypsum boards are usually required on both sides of walls and steel ceilings.
維護方法:
Maintenance method:
1. 我們將按照與鋼板相關的生產設備的操作流程進行操作。每次設備啟動前，根據潤滑圖的要求，定期添加潤滑油，添加的潤滑油必須清潔無結。盤式發動機軸承中的潤滑油也應經常更換。
We will operate according to the operating procedures of the production equipment related to steel plates. Before each equipment startup, add lubricating oil regularly according to the requirements of the lubrication diagram, and the added lubricating oil must be clean and free of knots. The lubricating oil in the bearings of the disc engine should also be replaced frequently.
2. 彩鋼板應始終保持清潔，未涂漆部分應涂防銹油;每天工作前10分鐘對鋼板機進行潤滑、擦拭和清潔。
2. The color steel plate should always be kept clean, and the unpainted parts should be coated with anti rust oil; Lubricate, wipe, and clean the steel plate machine 10 minutes before work every day.
3. 定期對開關、保險杠、手柄進行檢查和維修，確保其可靠運行;經常檢查彩鋼板設備的三角帶、手柄、旋鈕、按鈕等是否有損壞。如果磨損嚴重，應及時更換，并增加更換零件。
3. Regularly inspect and repair switches, bumpers, and handles to ensure their reliable operation; Regularly inspect the triangular belt, handle, knob, button, etc. of the color steel plate equipment for damage. If the wear is severe, it should be replaced in a timely manner and additional replacement parts should be added.
彩鋼板主要用于屋頂和墻壁。這種材料的使用壽命約為25年，這意味著它與主要結構的使用壽命不同。主體結構已經使用了50年左右，所以25年后需要更換鋼板。
Color steel plates are mainly used for roofs and walls. The service life of this material is about 25 years, which means it has a different service life from the main structure. The main structure has been in use for about 50 years, so the steel plate needs to be replaced after 25 years.
Thank you for reading. The source of this article is Yucheng Color Steel Factory. For more information and questions, please click http://m.yunhu3.com We will continue to work hard to provide you with services. Thank you for your support!
